 |
|
|
|
|
|
|
|
|
|
|
|
 |
|
||||||||||
 |
 |
 |
|
||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
||
| Part No's | From Oct 1962 to 1966 | |
| 3656-557 | TENSION NUT | £13.14 |
| 3656-608 | RELEASE SHAFT | obsolete |
| 3656-609 | COLLAR Use 4740-16-22 | £4.77 |
| 3656-610 | ANGLE BRACKET | £3.00 |
| 3656-611 | STOP PIN Use 4740-16-18 | £0.48 |
| 3656-612 | ECCENTRIC Use 4740-16-20 | £11.91 |
| 3656-613 | PIVOT BUSH | £3.09 |
| 3656-614 | SHIFTER | £7.95 |
| 3656-615 | TIE ROD | obsolete |
| 3656-616 | EYE BOLT 0.375" HOLE Use 616A | £9.24 |
| 3656-616A | EYE BOLT 10MM. HOLE | £9.24 |
| 3656-617 | SCREW PIN Use 4740-16-13 | obsolete |
| 3656-618 | LARGE BUSH OLD U/DRIVE INTERSHAFT | obsolete |
| 3656-619 | INTERMEDIATE SHAFT OLD U/DRIVE INTERSHAFT | obsolete |
| 3656-620 | COLLAR (1") OLD U/DRIVE INTERSHAFT | obsolete |
| 3656-621 | INTERMEDIATE PULLEY OLD U/DRIVE INTERSHAFT | obsolete |
| 3656-622 | SMALL BUSH OLD U/DRIVE INTERSHAFT | obsolete |
| 3656-623A | PIVOT BRACKET | £6.78 |
| 3656-624A | PIVOT SCREW | obsolete |
| 3656-625A | MOTOR PLATFORM | obsolete |
| 3656-626 | COUNTERSHAFT PULLEY 0.875" BORE | £60.00 |
| 3656-631 | 6" PULLEY (STATE BORE SIZE) | £24.87 |
| 3656-633 | 3" PULLEY | £30.45 |
| 3656-634 | MOTOR KEY | £0.90 |
| 3656-646A | MOTOR FIXING NUTS | £7.74 |
| BL-A32 | A32 (A850) V Belt | £6.03 |
| BL-LINK-1\2 | 40%A sect.x1/2" link belt 4.25 ft | £59.04 |
